The document cannot be saved if you have entered a mesh object. Please exit all objects.
The object must have at least two vertices.
The symbol is too large to fit into the current document. Try setting your scale to match the source document and import again.
Failed to open the file necessary to personalize your copy of the application. Perhaps you do not have permission to open the file? Application will now exit.
minutes. Would you like to save it now?
This document has not been saved for
Could not open the disk file specified. Please check to make sure that it was saved in version 6.
One or more operations was aborted due to lack of memory.
The QuickDraw 3D extension is too old. Please get a newer version of QuickDraw 3D to use this menu item.
The QuickDraw 3D extension was not found. You must have a copy of the QuickDraw 3D extension in your Extensions folder to use this menu item.
The file can not be read because it was created by a beta version of the application and is not supported by this version of the application.
You can only link text to a symbol. You are not in a symbol.
Sorry, but a fatal error occured while checking the network. Restart with extensions off and try again.
Error occurred while opening external. Make sure that there is an ΓÇ£ExternalsΓÇ¥ folder in the same folder as the application.
File already open!
Decimal numbers must have a value that is a power of 10 (e.g. 100, 1000, 10000 etc.)
Fractional numbers must have a value that is a power of 2 (e.g. 2, 16, 64 etc.)
There are no objects selected which can be extruded or swept. Try using a 2D object.
There were objects selected which are illegal in extrudes & sweeps. They have been deselected.
Walls cannot be filleted!
There are no overlays in your Overlays folder!
There is no overlays folder in the same directory as your application!
All tools and menus items have been disabled for this demo version. Please contact Graphsoft at (410) 290-5114 for a completely functional demo copy.
No overlay
The custom offset is an illegal value. Go to this toolΓÇÖs preference to reset the value.
Are you sure you want to convert the selected objects to 2D Lines?
Are you sure you want to convert the selected objects to 2D Polygons?
Cannot enter nested symbols from the drawing. Use the Select Symbol dialog.
The Join & Fillet command does not work with two lines. Try using the Fillet tool instead.
Hybrid objects can only be rotated about the Z axis.
A disk related error has occurred.
Hybrid Symbols can only be inserted in plan projection with this tool.
Cannot place this file because it does not contain a valid %%BoundingBox comment.
This is not a valid EPS file.
Click on one wall and drag to another wall to join.
No 3D objects selected!
This file was created with a newer version of this program and cannot be read by this version.
This file is in an old format not read by this version of the program. Please contact Graphsoft about converting it.
Would you like the working plane flipped to a usable orientation?
The ruler origin cannot be set unless the active layer is in plan view.
3D symbol centers must be specified with the 3D cursor. Change to the 3D tool palette.
2D and hybrid symbols must be created in Plan Projection.
Only one 3D object can be reshaped at a time.
This operation only works on hybrid objects in plan projection.
With the given height and position, the pitch angle of the roof will be greater than the 85┬░ limit. A height has been selected that crops the pitch angle to 85┬░.
That ratio of rise/run specifies a pitch angle which is greater than the 85┬░ limit. The rise distance has been adjusted to describe a pitch angle of 85┬░.
Pitch angles can be no larger than 85┬░. The angle has been cropped to 85┬░.
The current symbol is hybrid. Would you like the working plane set to the ground plane?
2D symbols cannot be placed by the 3D symbol insertion tool.
The Align Plane tool does not work with walls or roofs. They must remain oriented relative to the ground plane.
One or more of the values in this dialog is not valid. Please change that value to a legal number.
A symbol of that name could not be found in the specified directory.
Hybrid objects can only be mirrored such that they remain perpendicular to the ground plane. Set the working plane so that it intersects the ground plane at 90┬░.
Hybrid objects can only be mirrored such that they remain perpendicular to the ground plane. Would you like the working plane set to the ground plane?
Hybrid objects can only be rotated about the perpendicular to the ground plane. Would you like the working plane set to the ground plane?
The mirror tool works on selected objects only. None are currently selected.
You do not have another layer with which to create a Layer Link.
This tool works only in perspective projection. Would you like to change projection to perspective?
There is no object selected to use as the center of rotation. Either change the center of rotation selection in the mode bar or select an object.
The 3D tools are not available while the active layer is in plan projection. Would you like to switch this layer to orthogonal projection?
There is no symbol currently selected.
There is already another copy of the application running on this network with the same serial number.
One or more operations was aborted due to lack of memory.
Increase partition size!
The file is being converted and a new file will be opened with a new name.
The text size is too small for creation or editing. Please zoom in.
Some RenderManΓäó resources could not be located in the system folder.
The combination of units and scale chosen would produce an illegal drawing environment. Please reduce accuracy or scale.
Ran out of memory while trying to draw rotated text.
DXF file is too large to fit into current units setting.
Illegal objects detected in drawing! Some objects have been removed.
This file is damaged! It will open with as much data as possible.
Unknown file type! An untitled document will be opened.
Cannot open EPS files directly ΓÇö- a new document will be opened. To place the EPS file in it, use the 'Import EPS' command.
All layers must have different names!
Name already in use!
Cannot link text to a rotated symbol.
Must select one text item and one symbol instance only.
Attempt to create cyclical symbol! Object will be inserted as group instead of symbol.
A worksheet is not active.
This name is already in use. Reverting to old name.
3D Polygon must be selected.
Tablet driver not found.
This application is an invalid copy.
The disk drive or file is marked read-only.
Please unmark it and try again.
There is not enough space on the disk to save the file.
QuickDraw error!
Resource Manager error!
Error occurred during printing.
Printing Manager error ^0.
Printer driver or printer resource file missing or corrupted. Prt Mgr error ^0.
Application requires System 6.0.5 or later to run!
Application will not run using
old Macintosh 64K ROM!
Specified fillet radius will not fit on the lines.
Fillet radius is too small.
This pattern is not editable.
A rectangular bounding box must be selected!
Fillet radius is too large.
Illegal object(s) selected.
Please close files in other subsections before quitting.
Out Of Memory!
Two or more unlocked objects must be selected.
The selection is locked.
Too many objects selected!
No objects selected!
Enter 'Normal Scale' to Edit Text!
Overlapping or intersecting polygons should be removed!
Storage for more vertices is unavailable.
Some cavities were outside the wall separation and have been clipped or removed to fit.
Cavities cannot be modified when the wall separation is set to 0.
